NFS

You can view information and options set for each of the mounted NFS file systems by running nfsstat -m and cat /etc/fstab.

NOTE: Note: Filesystem performance has a big impact on overall GitLab performance, especially for actions that read or write to Git repositories. See Filesystem Performance Benchmarking for steps to test filesystem performance.

NFS Server features

Required features

File locking: GitLab requires advisory file locking, which is only supported natively in NFS version 4. NFSv3 also supports locking as long as Linux Kernel 2.6.5+ is used. We recommend using version 4 and do not specifically test NFSv3.

Recommended options

When you define your NFS exports, we recommend you also add the following options:

  • no_root_squash - NFS normally changes the root user to nobody. This is a good security measure when NFS shares will be accessed by many different users. However, in this case only GitLab will use the NFS share so it is safe. GitLab recommends the no_root_squash setting because we need to manage file permissions automatically. Without the setting you may receive errors when the Omnibus package tries to alter permissions. Note that GitLab and other bundled components do not run as root but as non-privileged users. The recommendation for no_root_squash is to allow the Omnibus package to set ownership and permissions on files, as needed. In some cases where the no_root_squash option is not available, the root flag can achieve the same result.
  • sync - Force synchronous behavior. Default is asynchronous and under certain circumstances it could lead to data loss if a failure occurs before data has synced.

Due to the complexities of running Omnibus with LDAP and the complexities of maintaining ID mapping without LDAP, in most cases you should enable numeric UIDs and GIDs (which is off by default in some cases) for simplified permission management between systems:

Improving NFS performance with GitLab

NOTE: Note: From GitLab 12.1, it will automatically be detected if Rugged can and should be used per storage.

If you previously enabled Rugged using the feature flag, you will need to unset the feature flag by using:

sudo gitlab-rake gitlab:features:unset_rugged

If the Rugged feature flag is explicitly set to either true or false, GitLab will use the value explicitly set.

Known issues

On some customer systems, we have seen NFS clients slow precipitously due to excessive network traffic from numerous TEST_STATEID NFS messages. This is likely due to a Linux kernel bug that may be fixed in more recent kernels with this commit.

NOTE: Note Red Hat Enterprise 7 shipped a kernel update on August 6, 2019 that may have resolved this problem. The following instructions may not be needed if the latest kernel is updated properly.

GitLab recommends all NFS users disable the NFS server delegation feature. To disable NFS server delegations on an Linux NFS server, do the following:

  1. On the NFS server, run:

    echo 0 > /proc/sys/fs/leases-enable
    sysctl -w fs.leases-enable=0
  2. Restart the NFS server process. For example, on CentOS run service nfs restart.

Avoid using AWS's Elastic File System (EFS)

GitLab strongly recommends against using AWS Elastic File System (EFS). Our support team will not be able to assist on performance issues related to file system access.

Customers and users have reported that AWS EFS does not perform well for GitLab's use-case. Workloads where many small files are written in a serialized manner, like git, are not well-suited for EFS. EBS with an NFS server on top will perform much better.

If you do choose to use EFS, avoid storing GitLab log files (e.g. those in /var/log/gitlab) there because this will also affect performance. We recommend that the log files be stored on a local volume.

For more details on another person's experience with EFS, see this Commit Brooklyn 2019 video.

Avoid using CephFS and GlusterFS

GitLab strongly recommends against using CephFS and GlusterFS. These distributed file systems are not well-suited for GitLab's input/output access patterns because Git uses many small files and access times and file locking times to propagate will make Git activity very slow.

Avoid using PostgreSQL with NFS

GitLab strongly recommends against running your PostgreSQL database across NFS. The GitLab support team will not be able to assist on performance issues related to this configuration.

Additionally, this configuration is specifically warned against in the Postgres Documentation:

PostgreSQL does nothing special for NFS file systems, meaning it assumes NFS behaves exactly like locally-connected drives. If the client or server NFS implementation does not provide standard file system semantics, this can cause reliability problems. Specifically, delayed (asynchronous) writes to the NFS server can cause data corruption problems.

For supported database architecture, please see our documentation on Configuring a Database for GitLab HA.

NFS Client mount options

Below is an example of an NFS mount point defined in /etc/fstab we use on GitLab.com:

10.1.1.1:/var/opt/gitlab/git-data /var/opt/gitlab/git-data nfs4 defaults,soft,rsize=1048576,wsize=1048576,noatime,nofail,lookupcache=positive 0 2

Note there are several options that you should consider using:

Setting Description
vers=4.1 NFS v4.1 should be used instead of v4.0 because there is a Linux NFS client bug in v4.0 that can cause significant problems due to stale data.
nofail Don't halt boot process waiting for this mount to become available
lookupcache=positive Tells the NFS client to honor positive cache results but invalidates any negative cache results. Negative cache results cause problems with Git. Specifically, a git push can fail to register uniformly across all NFS clients. The negative cache causes the clients to 'remember' that the files did not exist previously.

A single NFS mount

It's recommended to nest all GitLab data dirs within a mount, that allows automatic restore of backups without manually moving existing data.

mountpoint
└── gitlab-data
    ├── builds
    ├── git-data
    ├── shared
    └── uploads

To do so, we'll need to configure Omnibus with the paths to each directory nested in the mount point as follows:

Mount /gitlab-nfs then use the following Omnibus configuration to move each data location to a subdirectory:

git_data_dirs({"default" => { "path" => "/gitlab-nfs/gitlab-data/git-data"} })
gitlab_rails['uploads_directory'] = '/gitlab-nfs/gitlab-data/uploads'
gitlab_rails['shared_path'] = '/gitlab-nfs/gitlab-data/shared'
gitlab_ci['builds_directory'] = '/gitlab-nfs/gitlab-data/builds'

Run sudo gitlab-ctl reconfigure to start using the central location. Please be aware that if you had existing data you will need to manually copy/rsync it to these new locations and then restart GitLab.

Bind mounts

Alternatively to changing the configuration in Omnibus, bind mounts can be used to store the data on an NFS mount.

Bind mounts provide a way to specify just one NFS mount and then bind the default GitLab data locations to the NFS mount. Start by defining your single NFS mount point as you normally would in /etc/fstab. Let's assume your NFS mount point is /gitlab-nfs. Then, add the following bind mounts in /etc/fstab:

/gitlab-nfs/gitlab-data/git-data /var/opt/gitlab/git-data none bind 0 0
/gitlab-nfs/gitlab-data/.ssh /var/opt/gitlab/.ssh none bind 0 0
/gitlab-nfs/gitlab-data/uploads /var/opt/gitlab/gitlab-rails/uploads none bind 0 0
/gitlab-nfs/gitlab-data/shared /var/opt/gitlab/gitlab-rails/shared none bind 0 0
/gitlab-nfs/gitlab-data/builds /var/opt/gitlab/gitlab-ci/builds none bind 0 0

Using bind mounts will require manually making sure the data directories are empty before attempting a restore. Read more about the restore prerequisites.

Multiple NFS mounts

When using default Omnibus configuration you will need to share 4 data locations between all GitLab cluster nodes. No other locations should be shared. The following are the 4 locations need to be shared:

Location Description Default configuration
/var/opt/gitlab/git-data Git repository data. This will account for a large portion of your data git_data_dirs({"default" => { "path" => "/var/opt/gitlab/git-data"} })
/var/opt/gitlab/gitlab-rails/uploads User uploaded attachments gitlab_rails['uploads_directory'] = '/var/opt/gitlab/gitlab-rails/uploads'
/var/opt/gitlab/gitlab-rails/shared Build artifacts, GitLab Pages, LFS objects, temp files, etc. If you're using LFS this may also account for a large portion of your data gitlab_rails['shared_path'] = '/var/opt/gitlab/gitlab-rails/shared'
/var/opt/gitlab/gitlab-ci/builds GitLab CI build traces gitlab_ci['builds_directory'] = '/var/opt/gitlab/gitlab-ci/builds'

Other GitLab directories should not be shared between nodes. They contain node-specific files and GitLab code that does not need to be shared. To ship logs to a central location consider using remote syslog. GitLab Omnibus packages provide configuration for UDP log shipping.

Having multiple NFS mounts will require manually making sure the data directories are empty before attempting a restore. Read more about the restore prerequisites.


Read more on high-availability configuration:

  1. Configure the database
  2. Configure Redis
  3. Configure the GitLab application servers
  4. Configure the load balancers